EN 10305-6welded cold drawn tubes for hydraulic and pneumatic lines
EN 10305-6 sets the technical delivery conditions for welded cold drawn steel tubes of circular cross-section for use in hydraulic and pneumatic power systems.1 It is the welded counterpart of Part 4.1, 2
- Standard
- EN 10305-6: Welded cold drawn tubes for hydraulic and pneumatic power systems3
- Tube
- Welded, cold drawn1
- Purpose
- Hydraulic and pneumatic power systems1
- Cross-sections in scope
- Circular1
- Replaced in Germany
- No DIN standard named7
- Facts checked
- 20 November 2026
What does EN 10305-6 cover?
As in the other parts, the tubes are characterized by precisely defined dimensional tolerances and a specified surface roughness. For use at low temperatures, the scope refers to impact energy requirements at 0 °C.1, 4
DIN states that the tubes of Parts 4 and 6 are used for pressure equipment and that these standards are harmonized under the European Pressure Equipment Directive.3, 8
The current edition is EN 10305-6:2016, published in March 2016. The German version DIN EN 10305-6:2016-08 replaced DIN EN 10305-6:2005-08.3, 4 BSI lists BS EN 10305-6:2016 as ‘Current, Under Review’.6
How does Part 6 differ from Part 4 and Part 2?
Part 6 and Part 4 serve the same purpose with different starting tube: both cover cold drawn circular tubes for hydraulic and pneumatic power systems, Part 4 seamless and Part 6 welded.1, 2 Part 2 also covers welded cold drawn tubes. Against it, Part 6 narrows the purpose to hydraulic and pneumatic lines and adds the reference to impact energy at 0 °C, and DIN counts Parts 4 and 6 among the standards harmonized under the Pressure Equipment Directive.4, 8
| Attribute | Part 2 | Part 6 | Part 4 |
|---|---|---|---|
| Tube | Welded, cold drawn9 | Welded, cold drawn1 | Seamless, cold drawn10 |
| Purpose | General precision applications8 | Hydraulic and pneumatic power systems1 | Hydraulic and pneumatic power systems10 |
| Cross-sections in scope | Circular; may also be applied to other cross-sections9 | Circular1 | Circular10 |
| Size limit in scope | D ≤ 150 mm9, 11 | None in the published scope summary1, 4 | None in the published scope summary10 |
| Scope adds | No such addition in the scope summary9, 11 | Impact energy is specified at 0 °C4 | Pressure and temperature limits are for the customer to determine; impact energy is specified at 0 °C10 |
| Pressure Equipment Directive | Not named in DIN’s statement8 | Harmonized under the Pressure Equipment Directive, according to DIN3, 8 | Harmonized under the Pressure Equipment Directive, according to DIN3, 8 |
| Delivery conditions in one stockholder’s listing | +C, +LC, +SR, +A, +N12 | Not in the stockholder listing we checked12 | +N12, 13 |
| Current edition | EN 10305-2:201614 | EN 10305-6:20163, 4 | EN 10305-4:201610 |
| Status | Current14, 15 | Current; under review at BSI5, 6 | Current2 |
How is the tube supplied?
The stockholder page we used for the other parts lists no tube to Part 6.12
Which editions have there been?
Part 6 has had two editions, 2005 and 2016. Unlike the other parts it was not reissued in 2010 or 2011.3, 4, 7 DIN’s catalogue entry for the first edition of Part 6, DIN EN 10305-6:2005-08, names no earlier German standard that it replaced.7
Is there an ASTM equivalent of EN 10305-6?
SAE J525 covers electric-resistance-welded, cold-drawn, single-wall low-carbon steel pressure tubing, supplied normalized, for pressure lines and other uses that need bending, flaring, forming and brazing. SAE lists its latest issue, dated November 2025, as stabilized.16 ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.17
Sources
- ANSI Webstore. DIN EN 10305-6:2016, store entry with scope. webstore.ansi.org/standards/din/dinen103052016-1638474 Checked 20 November 2026.
- DIN Media. DIN EN 10305-4:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-4/251709296 Checked 20 November 2026.
- DIN Media. DIN EN 10305-6:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-6/251709059 Checked 20 November 2026.
- ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016. normy.normoff.gov.sk/norma/123383/nahlad Checked 20 November 2026.
- DIN. DIN EN 10305-6:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709059 Checked 20 November 2026.
- BSI Knowledge. BS EN 10305-6:2016, catalogue entry. knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-drawn-tubes-for-hydraulic-and-pneumatic-power-systems Checked 20 November 2026.
- DIN Media. DIN EN 10305-6:2005-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-6/50519044 Checked 20 November 2026.
- DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
- GlobalSpec. CEN, EN 10305-2, catalogue entry with scope. standards.globalspec.com/std/10004302/en-10305-2 Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-4:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-4-2016 Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-2:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-2-2016 Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
- HANSA-FLEX. Präzisionsrohr, EN 10305-4, nahtlos, Stahl E355+N, product page. shop.hansa-flex.de/de_DE/rohre/hydraulik-rohre/pr-st52-m/p/MAS_PR_ST52_%28M%29 Checked 20 November 2026.
- Intertek Inform. EN 10305-2:2016, catalogue entry. shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268 Checked 20 November 2026.
- DIN. DIN EN 10305-2:2016-08, standard entry. din.de/en/wdc-beuth:din21:251709396 Checked 20 November 2026.
- SAE International. SAE J525_202511, Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring. saemobilus.sae.org/standards/j525_202511-welded-cold-drawn-low-carbon-steel-tubing-annealed-bending-flaring Checked 20 November 2026.
- ASTM International. ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0513_a0513m-25.html Checked 20 November 2026.
About this page
This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.
The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.
All statements and sources of this page as data: JSON.
About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.