EN 10305the European standard series for precision steel tubes
EN 10305 is the European series of technical delivery conditions for steel tubes for precision applications.1 Six part numbers have been published, but since December 2023 only five are live: square and rectangular tubes moved from Part 5 into a new edition of Part 3.2, 3
Which part covers which tube?
Two questions lead to the right part: how the tube is made, and whether it will serve as a hydraulic or pneumatic line.1 Its parts are divided by how the tube is made and what it is for: Parts 1 and 2 cover seamless and welded cold drawn tubes, Parts 3 and 5 welded tubes that are sized by rolling, and Parts 4 and 6 cold drawn tubes for hydraulic and pneumatic lines.1
| How the tube is made | General precision applications | Hydraulic and pneumatic lines |
|---|---|---|
| Seamless, cold drawn | Part 1Round, D ≤ 380 mm | Part 4Round |
| Welded, cold drawn | Part 2Round, D ≤ 150 mm | Part 6Round |
| Welded, cold sized | Part 3Round to 193.7 mm, square and rectangular. Took over Part 5 in 2023. | No part covers cold sized tubes for hydraulic and pneumatic lines. |
| Part | Tube | Cross-sections in scope | Size limit in scope | Current edition | Status |
|---|---|---|---|---|---|
| EN 10305-1 | Seamless cold drawn tubes4 | Circular; may also be applied to other cross-sections4 | D ≤ 380 mm4, 5 | EN 10305-1:20164 | Current1, 4 |
| EN 10305-2 | Welded cold drawn tubes12 | Circular; may also be applied to other cross-sections7 | D ≤ 150 mm7, 8 | EN 10305-2:201612 | Current12, 13 |
| EN 10305-3 | Welded cold sized tubes2 | Circular, square and rectangular; may also be applied to other shapes2, 11 | D ≤ 193.7 mm for circular tubes2, 11 | EN 10305-3:20232 | Current14, 15 |
| EN 10305-4 | Seamless cold drawn tubes for hydraulic and pneumatic power systems16 | Circular6 | None in the published scope summary6 | EN 10305-4:20166 | Current16 |
| EN 10305-5 | Welded cold sized square and rectangular tubes17 | Square and rectangular17 | None in the published scope summary17 | EN 10305-5:2016, the last edition17 | Withdrawn; superseded by EN 10305-3:20232, 3 |
| EN 10305-6 | Welded cold drawn tubes for hydraulic and pneumatic power systems18 | Circular9 | None in the published scope summary9, 10 | EN 10305-6:201610, 18 | Current; under review at BSI19, 20 |
What changed in December 2023?
EN 10305-3:2023 was published in December 2023 and supersedes both EN 10305-3:2016 and EN 10305-5:2016.2, 21 Its foreword lists four changes: Parts 3 and 5 were merged so that one document covers welded cold sized tubes of all shapes; dimensions, thickness ranges and tolerances were aligned; steel grades were added; and the text was updated editorially.2
The German edition is DIN EN 10305-3:2024-02, which DIN lists as current.14, 22 DIN’s catalogue marks DIN EN 10305-5:2016-08 as withdrawn and names DIN EN 10305-3:2024-02 as its replacement.3 BSI lists BS EN 10305-3:2023, published on 31 December 2023, as current.15
The other four parts remain in their 2016 editions.4, 16, 18, 23 DIN describes the 2016 revision as mainly an update of references; for Parts 4 and 6 the requirements were also revised to reflect the needs of mechanical and vehicle engineering.13, 16
The overview text that DIN attaches to the 2016 editions still describes Parts 3 and 5 side by side.1, 19 A large European stockholder still listed square and rectangular welded precision tube under EN 10305-5 when we checked, from 10 × 10 × 1 mm to 70 × 70 × 4 mm square and from 20 × 10 × 1.5 mm to 100 × 40 × 3 mm rectangular, in +CR1 and +CR2 and in steel grades E220 and E235.24
What makes a steel tube a precision tube?
The scopes of the parts say what sets these tubes apart: precisely defined tolerances on dimensions and a specified maximum surface roughness.4, 6, 12 DIN describes the parts as dimensional standards as well as material standards. They contain the steels and delivery conditions together with preferred dimensions, dimensional limits and tolerances, so a tube can be ordered against the standard without drawing on further standards.1
As typical products DIN names shafts, axles, cylinders, injection lines, hydraulic and pneumatic lines and ring-shaped machine parts, used mainly in mechanical and automotive engineering and also in furniture.1, 19
Circular steel tubes for mechanical and general engineering purposes have their own European standards: EN 10297-1 for seamless and EN 10296-1 for welded tubes.25, 26 A stockholder’s conversion chart for the Euronorms sorts tubes into five families (pressure, construction, pipeline, mechanical and precision) and files EN 10305 under precision.27
Which parts are for hydraulic and pneumatic lines?
Parts 4 and 6 cover cold drawn tubes for hydraulic and pneumatic power systems, seamless in Part 4 and welded in Part 6.9, 16 DIN states that the tubes of Parts 4 and 6 are used for pressure equipment and that these standards are harmonized under the European Pressure Equipment Directive.1, 18
The scope leaves the allowable pressure and temperature to the customer, who is to determine them in line with the state of the art and with the safety factors of the applicable regulations, codes or standards.6 For use at low temperatures, the scope points to impact energy requirements specified at 0 °C.6
- Part 4: seamless tubes for hydraulic and pneumatic lines
- Part 6: welded tubes for hydraulic and pneumatic lines
Which inspection document comes with the tube?
EN 10204 defines four types of inspection document. Types 2.1 and 2.2 are based on non-specific inspection, types 3.1 and 3.2 on specific inspection.28 A 2.2 test report is the manufacturer’s declaration of compliance with the order together with test results. A 3.1 inspection certificate is issued by the manufacturer and validated by its authorized inspection representative, who is independent of production.28
| Type | Name | Based on | Who stands behind it |
|---|---|---|---|
| 2.128 | Declaration of compliance with the order | Non-specific inspection | The manufacturer; no test results |
| 2.228 | Test report | Non-specific inspection | The manufacturer, with test results |
| 3.128 | Inspection certificate 3.1 | Specific inspection | The manufacturer, validated by its authorized inspection representative, who is independent of production |
| 3.228 | Inspection certificate 3.2 | Specific inspection | The manufacturer’s authorized inspection representative together with the purchaser’s representative or an official inspector |
Which type accompanies precision tube varies by part in trade listings. One European stockholder offers 2.2 or 3.1 for seamless tube to Part 1, 2.2 for welded tube to Parts 2, 3 and 5, and 3.1 for hydraulic line tube to Part 4, each with other documents on request.24
| Part | Product as listed | Sizes listed | Delivery conditions | Steel grades | Inspection document |
|---|---|---|---|---|---|
| Part 1 | Seamless precision steel tubes24 | 4.0 × 0.5 mm to 200 × 10 mm | +C (BK), +N (NBK), +SR (BKS) | E235, E355 | 2.2 or 3.1 |
| Part 2 | Welded cold-drawn precision steel tubes24 | 8 × 1 mm to 200 × 10 mm | +C (BK), +N (NBK), +A (GBK), +LC (BKW), +SR (BKS) | E235, E355 | 2.2 |
| Part 3 | Welded cold formed precision steel tubes: round, flat oval, elliptical, tunnel and table-leg profiles24 | 10 × 1 mm to 108 × 2 mm | +CR1 (BKM), +CR2 (BKM / soft), +N (NBK) | E220, E235 | 2.2 |
| Part 4 | Seamless hydraulic and pneumatic line pipes24 | 4 × 0.5 mm to 114.3 × 20 mm | +N (NBK) where a condition is stated | E235, E355 | 3.1 |
| Part 5 | Welded cold formed precision steel tubes, square or rectangular24 | Square 10 × 10 × 1 mm to 70 × 70 × 4 mm; rectangular 20 × 10 × 1.5 mm to 100 × 40 × 3 mm | +CR1 (BKM), +CR2 (BKM / soft) | E220, E235 | 2.2 |
Where does the series come from?
In Germany the first editions of Parts 1, 2, 3 and 5 replaced DIN 2391, DIN 2393, DIN 2394 and DIN 2395 between February and August 2003.29, 30, 31, 32 The series is maintained by CEN/TC 459/SC 10 in its working group 10, tubes for mechanical and general engineering purposes; the German mirror committee is NA 021-00-09-09 UA at DIN.4, 14
Sources
- DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
- iTeh Standards. EN 10305-3:2023, catalogue entry with foreword preview. standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023 Checked 20 November 2026.
- DIN Media. DIN EN 10305-5:2016-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/251709341 Checked 20 November 2026.
- Intertek Inform. EN 10305-1:2016, catalogue entry with scope. shop.standards.ie/en-ie/standards/en-10305-1-2016-333477_saig_cen_cen_766266 Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-1:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-1-2016 Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-4:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-4-2016 Checked 20 November 2026.
- GlobalSpec. CEN, EN 10305-2, catalogue entry with scope. standards.globalspec.com/std/10004302/en-10305-2 Checked 20 November 2026.
- EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-2:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-2-2016 Checked 20 November 2026.
- ANSI Webstore. DIN EN 10305-6:2016, store entry with scope. webstore.ansi.org/standards/din/dinen103052016-1638474 Checked 20 November 2026.
- ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016. normy.normoff.gov.sk/norma/123383/nahlad Checked 20 November 2026.
- UNI, Ente Italiano di Normazione. EN 10305-3:2023, store entry with scope. store.uni.com/en/en-10305-3-2023 Checked 20 November 2026.
- Intertek Inform. EN 10305-2:2016, catalogue entry. shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268 Checked 20 November 2026.
- DIN. DIN EN 10305-2:2016-08, standard entry. din.de/en/wdc-beuth:din21:251709396 Checked 20 November 2026.
- DIN. DIN EN 10305-3:2024-02, standard entry. din.de/en/wdc-beuth:din21:368040564 Checked 20 November 2026.
- BSI Knowledge. BS EN 10305-3:2023, catalogue entry. knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-sized-tubes-3 Checked 20 November 2026.
- DIN Media. DIN EN 10305-4:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-4/251709296 Checked 20 November 2026.
- Intertek Inform. EN 10305-5:2016 (withdrawn), catalogue entry with scope. shop.standards.ie/en-ie/standards/en-10305-5-2016-333483_saig_cen_cen_766278 Checked 20 November 2026.
- DIN Media. DIN EN 10305-6:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-6/251709059 Checked 20 November 2026.
- DIN. DIN EN 10305-6:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709059 Checked 20 November 2026.
- BSI Knowledge. BS EN 10305-6:2016, catalogue entry. knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-drawn-tubes-for-hydraulic-and-pneumatic-power-systems Checked 20 November 2026.
- ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-3 (2024), preview with the title page of EN 10305-3:2023. normy.normoff.gov.sk/norma/138662/nahlad Checked 20 November 2026.
- DIN Media. DIN EN 10305-3:2024-02, catalogue entry. dinmedia.de/en/standard/din-en-10305-3/368040564 Checked 20 November 2026.
- DIN Media. DIN EN 10305-2:2016-08, catalogue entry. dinmedia.de/en/standard/din-en-10305-2/251709396 Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
- DIN. EN 10297-1, standard entry. din.de/en/getting-involved/standards-committees/fes/publications/wdc-beuth:din21:63421258 Checked 20 November 2026.
- DIN. EN 10296-1, standard entry. din.de/en/getting-involved/standards-committees/fes/publications/wdc-beuth:din21:66417818 Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. Overview main new Euronorms for pipes and tubes (PDF). vanleeuwen.com/en/assets/File/Tabel%20Euronormen%20ENG.pdf Checked 20 November 2026.
- Van Leeuwen Pipe and Tube. EN 10204 inspection documents. vanleeuwen.com/services/testing-and-material-inspections/en10204 Checked 20 November 2026.
- DIN Media. DIN EN 10305-1:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-1/53751164 Checked 20 November 2026.
- DIN Media. DIN EN 10305-2:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-2/53751251 Checked 20 November 2026.
- DIN Media. DIN EN 10305-3:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-3/53751278 Checked 20 November 2026.
- DIN Media. DIN EN 10305-5:2003-08 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-5/46631070 Checked 20 November 2026.
About this page
This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.
The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.
All statements and sources of this page as data: JSON.
About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.