precision.tube

EN 10305 series

EN 10305-1seamless cold drawn precision steel tubes

EN 10305-1 sets the technical delivery conditions for seamless cold drawn steel tubes of circular cross-section with a specified outside diameter D of up to 380 mm.1, 2 In Germany it took the place of DIN 2391 in 2003.3

D ≤ 380 mmwall thickness
Standard
EN 10305-1: Seamless cold drawn tubes1
Tube
Seamless, cold drawn1
Purpose
General precision applications4
Cross-sections in scope
Circular; may also be applied to other cross-sections1
Size limit in scope
D ≤ 380 mm1, 2
Status
Current1, 4
European edition
EN 10305-1:20161
German edition
DIN EN 10305-1:2016-084, 5
Replaced in Germany
DIN 2391-1 and DIN 2391-2, in 20033
Facts checked
20 November 2026
Sketch, not to scale. D is the specified outside diameter.

What does EN 10305-1 cover?

The scope adds that the document may also be applied to other types of cross-section.1 Tubes to this part are characterized by precisely defined tolerances on dimensions and a specified maximum surface roughness.1 The scope names the automotive, furniture and general engineering industries as typical fields of application.1, 6

The current European edition is EN 10305-1:2016, published in March 2016; the German version is DIN EN 10305-1:2016-08.1, 5 DIN describes the 2016 revision as mainly an update of references; for Parts 4 and 6 the requirements were also revised to reflect the needs of mechanical and vehicle engineering.7, 8

How is the tube made and supplied?

A German manufacturer describes the production route as cold drawing of hot-rolled hollows. Drawing reduces diameter and wall thickness and gives the tube its dimensional accuracy and surface finish; cold forming and later heat treatment set the mechanical properties.9 Among the delivery conditions it lists are the five that also appear in stockholders’ EN 10305 listings: +C (cold finished, hard), +LC (cold finished, soft), +SR (cold finished and stress-relieved), +A (soft annealed) and +N (normalized).9, 10

One European stockholder lists Part 1 tube from 4.0 × 0.5 mm to 200 × 10 mm in +C, +N and +SR, in steel grades E235 and E355, with a 2.2 or 3.1 inspection document.10 The same page lists seamless tube to EN 10305-1 for piston tubes up to 300 × 25 mm in E355, and cylinder tubes to EN 10305-1 or EN 10305-2 up to 300 × 25 mm as well.10 The manufacturer gives its own range as 1.5 to 178 mm outside diameter and 0.2 to 17.5 mm wall thickness.9

EN 10305-1 or EN 10305-4?

Part 4 covers the same kind of tube, seamless and cold drawn, for one purpose: hydraulic and pneumatic lines.11 The scope leaves the allowable pressure and temperature to the customer, who is to determine them in line with the state of the art and with the safety factors of the applicable regulations, codes or standards.11

Which editions have there been?

Editions of EN 10305-1
German editionEuropean editionStatusReplaced
DIN EN 10305-1:2003-023EN 10305-1:2002WithdrawnDIN 2391-1:1994-09, DIN 2391-2:1994-093
DIN EN 10305-1:2010-053, 5EN 10305-1:2010WithdrawnDIN EN 10305-1:2003-023, 5
DIN EN 10305-1:2016-084, 5EN 10305-1:2016CurrentDIN EN 10305-1:2010-054, 5

Data: CSV, JSON.

The first German edition, DIN EN 10305-1:2003-02, replaced DIN 2391-1:1994-09 (dimensions) and DIN 2391-2:1994-09 (technical delivery conditions).3, 12, 13 The series is maintained by CEN/TC 459/SC 10 in its working group 10, tubes for mechanical and general engineering purposes; the German mirror committee is NA 021-00-09-09 UA at DIN.1, 14

What is the ASTM equivalent of EN 10305-1?

ASTM A519/A519M covers seamless carbon and alloy steel mechanical tubing, both hot-finished and cold-finished. Round tubes are covered up to 12 3/4 in (325 mm) outside diameter, and the specification also includes square, rectangular and special shapes.15

Sources

  1. Intertek Inform. EN 10305-1:2016, catalogue entry with scope. shop.standards.ie/en-ie/standards/en-10305-1-2016-333477_saig_cen_cen_766266 Checked 20 November 2026.
  2. EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-1:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-1-2016 Checked 20 November 2026.
  3. DIN Media. DIN EN 10305-1:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-1/53751164 Checked 20 November 2026.
  4. DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
  5. DIN Media. DIN EN 10305-1:2016-08, catalogue entry. dinmedia.de/en/standard/din-en-10305-1/251709111 Checked 20 November 2026.
  6. Intertek Inform. EN 10305-2:2016, catalogue entry. shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268 Checked 20 November 2026.
  7. DIN Media. DIN EN 10305-4:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-4/251709296 Checked 20 November 2026.
  8. DIN. DIN EN 10305-2:2016-08, standard entry. din.de/en/wdc-beuth:din21:251709396 Checked 20 November 2026.
  9. Mannesmann Precision Tubes. Seamless and drawn precision steel tubes, product page. mannesmann.com/en/products-services/products/seamless-drawn-precision-steel-tubes-mpt.html Checked 20 November 2026.
  10. Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
  11. EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-4:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-4-2016 Checked 20 November 2026.
  12. DIN Media. DIN 2391-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2391-1/2357963 Checked 20 November 2026.
  13. DIN Media. DIN 2391-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2391-2/2358234 Checked 20 November 2026.
  14. DIN. DIN EN 10305-3:2024-02, standard entry. din.de/en/wdc-beuth:din21:368040564 Checked 20 November 2026.
  15. ASTM International. ASTM A519/A519M-24a, Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0519_a0519m-24a.html Checked 20 November 2026.

About this page

This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.

The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.

All statements and sources of this page as data: JSON.

About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.