precision.tube

EN 10305 series

EN 10305-2welded cold drawn precision steel tubes

EN 10305-2 sets the technical delivery conditions for welded cold drawn steel tubes of circular cross-section with a specified outside diameter D of up to 150 mm.1, 2 In Germany it took the place of DIN 2393 in 2003.3

D ≤ 150 mmwall thicknessweld seam
Standard
EN 10305-2: Welded cold drawn tubes4
Tube
Welded, cold drawn1
Purpose
General precision applications5
Cross-sections in scope
Circular; may also be applied to other cross-sections1
Size limit in scope
D ≤ 150 mm1, 2
Status
Current4, 6
European edition
EN 10305-2:20164
German edition
DIN EN 10305-2:2016-086, 7
Replaced in Germany
DIN 2393-1 and DIN 2393-2, in 20033, 8
Facts checked
20 November 2026
Sketch, not to scale. D is the specified outside diameter.

What does EN 10305-2 cover?

The scope adds that the document may also be applied to other types of cross-section.1 Tubes to this part are characterized by precisely defined tolerances on dimensions and a specified maximum surface roughness.4 The scope names the automotive, furniture and general engineering industries as typical fields of application.4, 9

The current European edition is EN 10305-2:2016, published in March 2016; the German version DIN EN 10305-2:2016-08 replaced DIN EN 10305-2:2010-05.4, 7 DIN describes the 2016 revision as mainly an update of references; for Parts 4 and 6 the requirements were also revised to reflect the needs of mechanical and vehicle engineering.6, 10

How is the tube made and supplied?

A German manufacturer describes the production route as cold drawing of hollows welded by high-frequency induction. Drawing reduces outside diameter and wall thickness and gives the tube its dimensional accuracy and smooth surface.11 It lists the same delivery conditions as for seamless drawn tube, among them +C, +LC, +SR, +A and +N.11

One European stockholder lists Part 2 tube from 8 × 1 mm to 200 × 10 mm in +C, +LC, +SR, +A and +N, in steel grades E235 and E355, with a 2.2 test report.12 That listing runs to 200 mm outside diameter, beyond the 150 mm at which the scope of the standard ends.1, 12

Is DOM tubing the same as EN 10305-2?

ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.13

What is the difference between EN 10305-2 and EN 10305-3?

Both parts cover welded tubes. In Part 2 the welded tube is cold drawn, and the scope ends at 150 mm outside diameter. In Part 3 the tube is sized by cold rolling after welding instead of being drawn; the scope reaches 193.7 mm for circular tubes and, since the 2023 edition, includes square and rectangular sections.1, 14, 15 The delivery conditions in trade listings differ accordingly: drawn tube is offered in +C, +LC, +SR, +A and +N, sized tube in +CR1, +CR2 and +N.12

EN 10305-2 and EN 10305-3 side by side
AttributePart 2Part 3
TubeWelded, cold drawn1Welded, cold sized14
PurposeGeneral precision applications5General precision applications16
Cross-sections in scopeCircular; may also be applied to other cross-sections1Circular, square and rectangular; may also be applied to other shapes14, 16
Size limit in scopeD ≤ 150 mm1, 2D ≤ 193.7 mm for circular tubes14, 16
Delivery conditions in one stockholder’s listing+C, +LC, +SR, +A, +N12+CR1, +CR2, +N; others on request12
Current editionEN 10305-2:20164EN 10305-3:202316
StatusCurrent4, 6Current17, 18

Data: CSV, JSON.

How does Part 2 relate to Part 6?

Part 2 also covers welded cold drawn tubes. Against it, Part 6 narrows the purpose to hydraulic and pneumatic lines and adds the reference to impact energy at 0 °C, and DIN counts Parts 4 and 6 among the standards harmonized under the Pressure Equipment Directive.5, 19

Which editions have there been?

Editions of EN 10305-2
German editionEuropean editionStatusReplaced
DIN EN 10305-2:2003-023EN 10305-2:2002WithdrawnDIN 2393-1:1994-09, DIN 2393-2:1994-093, 8
DIN EN 10305-2:2010-053, 7EN 10305-2:2010WithdrawnDIN EN 10305-2:2003-023, 7
DIN EN 10305-2:2016-086, 7EN 10305-2:2016CurrentDIN EN 10305-2:2010-056, 7

Data: CSV, JSON.

The first German edition, DIN EN 10305-2:2003-02, replaced DIN 2393-1:1994-09 (dimensions) and DIN 2393-2:1994-09 (technical delivery conditions).3, 8, 20

Sources

  1. GlobalSpec. CEN, EN 10305-2, catalogue entry with scope. standards.globalspec.com/std/10004302/en-10305-2 Checked 20 November 2026.
  2. EVS, Estonian Centre for Standardisation and Accreditation. EVS-EN 10305-2:2016, catalogue entry with scope. evs.ee/en/evs-en-10305-2-2016 Checked 20 November 2026.
  3. DIN Media. DIN EN 10305-2:2003-02 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-en-10305-2/53751251 Checked 20 November 2026.
  4. Intertek Inform. EN 10305-2:2016, catalogue entry. shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268 Checked 20 November 2026.
  5. DIN. DIN EN 10305-1:2016-08, standard entry with overview of the series. din.de/en/wdc-beuth:din21:251709111 Checked 20 November 2026.
  6. DIN. DIN EN 10305-2:2016-08, standard entry. din.de/en/wdc-beuth:din21:251709396 Checked 20 November 2026.
  7. DIN Media. DIN EN 10305-2:2016-08, catalogue entry. dinmedia.de/en/standard/din-en-10305-2/251709396 Checked 20 November 2026.
  8. DIN Media. DIN 2393-1:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2393-1/2358433 Checked 20 November 2026.
  9. Intertek Inform. EN 10305-1:2016, catalogue entry with scope. shop.standards.ie/en-ie/standards/en-10305-1-2016-333477_saig_cen_cen_766266 Checked 20 November 2026.
  10. DIN Media. DIN EN 10305-4:2016-08, catalogue entry with overview. dinmedia.de/en/standard/din-en-10305-4/251709296 Checked 20 November 2026.
  11. Mannesmann Precision Tubes. Welded and drawn precision steel tubes, product page. mannesmann.com/en/products-services/products/welded-drawn-precision-steel-tubes-mpt.html Checked 20 November 2026.
  12. Van Leeuwen Pipe and Tube. Carbon steel precision tubes and bars, product listing. vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars Checked 20 November 2026.
  13. ASTM International. ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. store.astm.org/a0513_a0513m-25.html Checked 20 November 2026.
  14. UNI, Ente Italiano di Normazione. EN 10305-3:2023, store entry with scope. store.uni.com/en/en-10305-3-2023 Checked 20 November 2026.
  15. Mannesmann Precision Tubes. Welded and size-rolled precision steel tubes, product page. mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html Checked 20 November 2026.
  16. iTeh Standards. EN 10305-3:2023, catalogue entry with foreword preview. standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023 Checked 20 November 2026.
  17. DIN. DIN EN 10305-3:2024-02, standard entry. din.de/en/wdc-beuth:din21:368040564 Checked 20 November 2026.
  18. BSI Knowledge. BS EN 10305-3:2023, catalogue entry. knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-sized-tubes-3 Checked 20 November 2026.
  19. ÚNMS SR, Slovak Office of Standards, Metrology and Testing. STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016. normy.normoff.gov.sk/norma/123383/nahlad Checked 20 November 2026.
  20. DIN Media. DIN 2393-2:1994-09 (withdrawn), catalogue entry. dinmedia.de/en/standard/din-2393-2/2358509 Checked 20 November 2026.

About this page

This page is generated from a graph of individual statements. Each statement carries its source and the date we checked it. Passages marked ‘Our reading’ are our own interpretation, with a stated confidence.

The page explains the standard and does not reproduce it. For design, ordering and inspection the standard itself is authoritative; it is sold by the national standards bodies. Supplier pages are cited as examples of trade practice, not as recommendations.

All statements and sources of this page as data: JSON.

About the author. Udo Bange has provided marketing support to companies in the steel tube and pipe industry for 25 years, among them Mannesmann, DMV, Europipe, the European Pipeline Research Group (EPRG), Gräbener Maschinentechnik and Standard-Metallwerke.