{
 "page": "https://precision.tube/en/en-10305/part-6",
 "checked": "2026-11-20",
 "statements": [
  {
   "id": "p6-scope",
   "text": "EN 10305-6 sets the technical delivery conditions for welded cold drawn steel tubes of circular cross-section for use in hydraulic and pneumatic power systems.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ANSI Webstore",
     "title": "DIN EN 10305-6:2016, store entry with scope",
     "url": "https://webstore.ansi.org/standards/din/dinen103052016-1638474",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-lead2",
   "text": "It is the welded counterpart of Part 4.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ANSI Webstore",
     "title": "DIN EN 10305-6:2016, store entry with scope",
     "url": "https://webstore.ansi.org/standards/din/dinen103052016-1638474",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-char",
   "text": "As in the other parts, the tubes are characterized by precisely defined dimensional tolerances and a specified surface roughness. For use at low temperatures, the scope refers to impact energy requirements at 0 °C.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ANSI Webstore",
     "title": "DIN EN 10305-6:2016, store entry with scope",
     "url": "https://webstore.ansi.org/standards/din/dinen103052016-1638474",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016",
     "url": "https://normy.normoff.gov.sk/norma/123383/nahlad",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "s-ped",
   "text": "DIN states that the tubes of Parts 4 and 6 are used for pressure equipment and that these standards are harmonized under the European Pressure Equipment Directive.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/251709059",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-edition",
   "text": "The current edition is EN 10305-6:2016, published in March 2016. The German version DIN EN 10305-6:2016-08 replaced DIN EN 10305-6:2005-08.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016",
     "url": "https://normy.normoff.gov.sk/norma/123383/nahlad",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/251709059",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-bsi",
   "text": "BSI lists BS EN 10305-6:2016 as ‘Current, Under Review’.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "BSI Knowledge",
     "title": "BS EN 10305-6:2016, catalogue entry",
     "url": "https://knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-drawn-tubes-for-hydraulic-and-pneumatic-power-systems",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-6v4",
   "text": "Part 6 and Part 4 serve the same purpose with different starting tube: both cover cold drawn circular tubes for hydraulic and pneumatic power systems, Part 4 seamless and Part 6 welded.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ANSI Webstore",
     "title": "DIN EN 10305-6:2016, store entry with scope",
     "url": "https://webstore.ansi.org/standards/din/dinen103052016-1638474",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-6v2",
   "text": "Part 2 also covers welded cold drawn tubes. Against it, Part 6 narrows the purpose to hydraulic and pneumatic lines and adds the reference to impact energy at 0 °C, and DIN counts Parts 4 and 6 among the standards harmonized under the Pressure Equipment Directive.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016",
     "url": "https://normy.normoff.gov.sk/norma/123383/nahlad",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-trade",
   "text": "The stockholder page we used for the other parts lists no tube to Part 6.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-two",
   "text": "Part 6 has had two editions, 2005 and 2016. Unlike the other parts it was not reissued in 2010 or 2011.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/251709059",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2005-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/50519044",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016",
     "url": "https://normy.normoff.gov.sk/norma/123383/nahlad",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p6-nopred",
   "text": "DIN’s catalogue entry for the first edition of Part 6, DIN EN 10305-6:2005-08, names no earlier German standard that it replaced.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2005-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/50519044",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p6",
   "text": "We found no ASTM specification written specifically for welded cold drawn hydraulic line tubing. The nearest North American counterpart to EN 10305-6 is SAE J525. ASTM A513 Type 5 describes the same product form, but as mechanical tubing without the hydraulic service framing.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p6-scope",
    "p6-sae",
    "p2-astm"
   ]
  },
  {
   "id": "p6-sae",
   "text": "SAE J525 covers electric-resistance-welded, cold-drawn, single-wall low-carbon steel pressure tubing, supplied normalized, for pressure lines and other uses that need bending, flaring, forming and brazing. SAE lists its latest issue, dated November 2025, as stabilized.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "SAE International",
     "title": "SAE J525_202511, Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring",
     "url": "https://saemobilus.sae.org/standards/j525_202511-welded-cold-drawn-low-carbon-steel-tubing-annealed-bending-flaring",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-astm",
   "text": "ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ASTM International",
     "title": "ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing",
     "url": "https://store.astm.org/a0513_a0513m-25.html",
     "checked": "2026-11-20"
    }
   ]
  }
 ]
}