{
 "page": "https://precision.tube/en/en-10305/part-2",
 "checked": "2026-11-20",
 "statements": [
  {
   "id": "p2-scope",
   "text": "EN 10305-2 sets the technical delivery conditions for welded cold drawn steel tubes of circular cross-section with a specified outside diameter D of up to 150 mm.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "GlobalSpec",
     "title": "CEN, EN 10305-2, catalogue entry with scope",
     "url": "https://standards.globalspec.com/std/10004302/en-10305-2",
     "checked": "2026-11-20"
    },
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-2:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-2-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-lead2",
   "text": "In Germany it took the place of DIN 2393 in 2003.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-2:2003-02 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-2/53751251",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-other",
   "text": "The scope adds that the document may also be applied to other types of cross-section.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "GlobalSpec",
     "title": "CEN, EN 10305-2, catalogue entry with scope",
     "url": "https://standards.globalspec.com/std/10004302/en-10305-2",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-char",
   "text": "Tubes to this part are characterized by precisely defined tolerances on dimensions and a specified maximum surface roughness.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-2:2016, catalogue entry",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "s-fields",
   "text": "The scope names the automotive, furniture and general engineering industries as typical fields of application.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-1:2016, catalogue entry with scope",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-1-2016-333477_saig_cen_cen_766266",
     "checked": "2026-11-20"
    },
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-2:2016, catalogue entry",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-edition",
   "text": "The current European edition is EN 10305-2:2016, published in March 2016; the German version DIN EN 10305-2:2016-08 replaced DIN EN 10305-2:2010-05.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-2:2016, catalogue entry",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-2-2016-333478_saig_cen_cen_766268",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-2:2016-08, catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-2/251709396",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "s-2016",
   "text": "DIN describes the 2016 revision as mainly an update of references; for Parts 4 and 6 the requirements were also revised to reflect the needs of mechanical and vehicle engineering.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-2:2016-08, standard entry",
     "url": "https://din.de/en/wdc-beuth:din21:251709396",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-make",
   "text": "A German manufacturer describes the production route as cold drawing of hollows welded by high-frequency induction. Drawing reduces outside diameter and wall thickness and gives the tube its dimensional accuracy and smooth surface.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and drawn precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-drawn-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-dc",
   "text": "It lists the same delivery conditions as for seamless drawn tube, among them +C, +LC, +SR, +A and +N.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and drawn precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-drawn-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-trade",
   "text": "One European stockholder lists Part 2 tube from 8 × 1 mm to 200 × 10 mm in +C, +LC, +SR, +A and +N, in steel grades E235 and E355, with a 2.2 test report.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-oversize",
   "text": "That listing runs to 200 mm outside diameter, beyond the 150 mm at which the scope of the standard ends.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    },
    {
     "publisher": "GlobalSpec",
     "title": "CEN, EN 10305-2, catalogue entry with scope",
     "url": "https://standards.globalspec.com/std/10004302/en-10305-2",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p2-oversize",
   "text": "For a size above the scope limit, ask the supplier which requirements of EN 10305-2 the inspection document will certify. A listing ‘to EN 10305-2’ does not answer that on its own.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p2-oversize"
   ]
  },
  {
   "id": "q-dom",
   "text": "It is the same kind of product, but not the same specification. DOM stands for drawn over mandrel, which is Type 5 of ASTM A513: an electric-resistance-welded tube that is cold drawn. EN 10305-2 likewise covers welded tubes finished by cold drawing. A tube certified to one is not thereby certified to the other, because steel grades, tolerances, delivery conditions and tests are defined separately in each document.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p2-scope",
    "p2-astm"
   ]
  },
  {
   "id": "p2-astm",
   "text": "ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ASTM International",
     "title": "ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing",
     "url": "https://store.astm.org/a0513_a0513m-25.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-2v3",
   "text": "Both parts cover welded tubes. In Part 2 the welded tube is cold drawn, and the scope ends at 150 mm outside diameter. In Part 3 the tube is sized by cold rolling after welding instead of being drawn; the scope reaches 193.7 mm for circular tubes and, since the 2023 edition, includes square and rectangular sections.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "GlobalSpec",
     "title": "CEN, EN 10305-2, catalogue entry with scope",
     "url": "https://standards.globalspec.com/std/10004302/en-10305-2",
     "checked": "2026-11-20"
    },
    {
     "publisher": "UNI, Ente Italiano di Normazione",
     "title": "EN 10305-3:2023, store entry with scope",
     "url": "https://store.uni.com/en/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and size-rolled precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-2v3-dc",
   "text": "The delivery conditions in trade listings differ accordingly: drawn tube is offered in +C, +LC, +SR, +A and +N, sized tube in +CR1, +CR2 and +N.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-2v3",
   "text": "Drawing is a separate forming step after welding; sizing happens in the tube mill itself. That makes Part 2 tube the usual choice where the bore and both diameters have to be tight, as in cylinder tubes, and Part 3 tube the choice where a welded tube with controlled outside dimensions is enough, as in furniture and vehicle structures.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p2-make",
    "p3-make",
    "p1-trade2",
    "p3-fields"
   ]
  },
  {
   "id": "q-6v2",
   "text": "Part 2 also covers welded cold drawn tubes. Against it, Part 6 narrows the purpose to hydraulic and pneumatic lines and adds the reference to impact energy at 0 °C, and DIN counts Parts 4 and 6 among the standards harmonized under the Pressure Equipment Directive.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-6 (2016), preview with the title page and scope of EN 10305-6:2016",
     "url": "https://normy.normoff.gov.sk/norma/123383/nahlad",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p2-pred",
   "text": "The first German edition, DIN EN 10305-2:2003-02, replaced DIN 2393-1:1994-09 (dimensions) and DIN 2393-2:1994-09 (technical delivery conditions).",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-2:2003-02 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-2/53751251",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2393-1:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2393-1/2358433",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2393-2:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2393-2/2358509",
     "checked": "2026-11-20"
    }
   ]
  }
 ]
}