{
 "page": "https://precision.tube/en/en-10305/part-5",
 "checked": "2026-11-20",
 "statements": [
  {
   "id": "p5-status",
   "text": "EN 10305-5 is withdrawn. Its last edition, EN 10305-5:2016, was superseded by EN 10305-3:2023 in December 2023.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-5:2016 (withdrawn), catalogue entry with scope",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-5-2016-333483_saig_cen_cen_766278",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-5:2016-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-5/251709341",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p5-lead2",
   "text": "What it covered, welded cold sized tubes of square and rectangular cross-section, is now part of EN 10305-3.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "UNI, Ente Italiano di Normazione",
     "title": "EN 10305-3:2023, store entry with scope",
     "url": "https://store.uni.com/en/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-supersedes",
   "text": "EN 10305-3:2023 was published in December 2023 and supersedes both EN 10305-3:2016 and EN 10305-5:2016.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-3 (2024), preview with the title page of EN 10305-3:2023",
     "url": "https://normy.normoff.gov.sk/norma/138662/nahlad",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-changes",
   "text": "Its foreword lists four changes: Parts 3 and 5 were merged so that one document covers welded cold sized tubes of all shapes; dimensions, thickness ranges and tolerances were aligned; steel grades were added; and the text was updated editorially.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-din5",
   "text": "DIN’s catalogue marks DIN EN 10305-5:2016-08 as withdrawn and names DIN EN 10305-3:2024-02 as its replacement.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-5:2016-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-5/251709341",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-evs",
   "text": "The Estonian catalogue shows the 2016 editions of Parts 3 and 5 as withdrawn from 15 December 2023.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p5",
   "text": "For new drawings and orders, cite EN 10305-3:2023 for square and rectangular welded precision tube. An existing document that cites EN 10305-5 still says what was agreed at the time, but it points to a withdrawn standard. Because the 2023 edition aligned dimensions, thickness ranges and tolerances and added steel grades, check the requirements instead of only swapping the number.",
   "kind": "reading",
   "confidence": "high",
   "rests_on": [
    "m-supersedes",
    "m-changes"
   ]
  },
  {
   "id": "m-scope",
   "text": "EN 10305-3 sets the technical delivery conditions for welded cold sized steel tubes: circular tubes with a specified outside diameter D of up to 193.7 mm, and tubes of square and rectangular cross-section. It may also be applied to other cross-section shapes.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "UNI, Ente Italiano di Normazione",
     "title": "EN 10305-3:2023, store entry with scope",
     "url": "https://store.uni.com/en/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p5-scope",
   "text": "The last edition covered welded cold sized steel tubes of square and rectangular cross-section, characterized like the rest of the series by defined dimensional tolerances and a specified maximum surface roughness. It named the automotive, furniture and general engineering industries as typical fields of application.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-5:2016 (withdrawn), catalogue entry with scope",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-5-2016-333483_saig_cen_cen_766278",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-trade",
   "text": "A large European stockholder still listed square and rectangular welded precision tube under EN 10305-5 when we checked, from 10 × 10 × 1 mm to 70 × 70 × 4 mm square and from 20 × 10 × 1.5 mm to 100 × 40 × 3 mm rectangular, in +CR1 and +CR2 and in steel grades E220 and E235.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p5-pred",
   "text": "The first German edition, DIN EN 10305-5:2003-08, replaced DIN 2395-1:1994-09 (dimensions for general use) and DIN 2395-2:1994-09 (technical delivery conditions for general use).",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-5:2003-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-5/46631070",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2395-1:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2395-1/2355788",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2395-2:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2395-2/2355917",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p5-astm",
   "text": "ASTM has no separate document to map EN 10305-5 to. In ASTM A513, square and rectangular shapes are part of the same specification as round electric-resistance-welded tubing.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p2-astm"
   ]
  },
  {
   "id": "p2-astm",
   "text": "ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ASTM International",
     "title": "ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing",
     "url": "https://store.astm.org/a0513_a0513m-25.html",
     "checked": "2026-11-20"
    }
   ]
  }
 ]
}