{
 "page": "https://precision.tube/en/en-10305/part-4",
 "checked": "2026-11-20",
 "statements": [
  {
   "id": "p4-scope",
   "text": "EN 10305-4 sets the technical delivery conditions for seamless cold drawn steel tubes of circular cross-section used in hydraulic and pneumatic power systems.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-lead2",
   "text": "It is the tube that stockholders sell as hydraulic line tube, normalized and with a 3.1 inspection certificate.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    },
    {
     "publisher": "HANSA-FLEX",
     "title": "Präzisionsrohr, EN 10305-4, nahtlos, Stahl E355+N, product page",
     "url": "https://shop.hansa-flex.de/de_DE/rohre/hydraulik-rohre/pr-st52-m/p/MAS_PR_ST52_%28M%29",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-char",
   "text": "As in the rest of the series, the tubes have precisely defined dimensional tolerances and a specified maximum surface roughness.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-resp",
   "text": "The scope leaves the allowable pressure and temperature to the customer, who is to determine them in line with the state of the art and with the safety factors of the applicable regulations, codes or standards.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-impact",
   "text": "For use at low temperatures, the scope points to impact energy requirements specified at 0 °C.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "s-ped",
   "text": "DIN states that the tubes of Parts 4 and 6 are used for pressure equipment and that these standards are harmonized under the European Pressure Equipment Directive.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-6:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-6/251709059",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-ped",
   "text": "The Estonian standards body lists the Pressure Equipment Directive 2014/68/EU against EN 10305-4:2016.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-esr",
   "text": "A note in the scope limits what this means: conformity with the directive’s essential safety requirements relates to the technical data of the material and does not establish that the material suits a particular item of equipment.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-edition",
   "text": "The current edition is EN 10305-4:2016; the German version DIN EN 10305-4:2016-08 replaced DIN EN 10305-4:2011-04.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    },
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "s-2016",
   "text": "DIN describes the 2016 revision as mainly an update of references; for Parts 4 and 6 the requirements were also revised to reflect the needs of mechanical and vehicle engineering.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2016-08, catalogue entry with overview",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/251709296",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-2:2016-08, standard entry",
     "url": "https://din.de/en/wdc-beuth:din21:251709396",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-1v4",
   "text": "Both parts cover seamless cold drawn tubes of circular cross-section. Part 1 is the general document: its scope runs to 380 mm outside diameter and allows other cross-sections. Part 4 is written for tubes that serve as hydraulic and pneumatic lines: its scope makes the customer responsible for pressure and temperature limits and points to impact energy requirements at 0 °C, and DIN counts it among the standards harmonized under the Pressure Equipment Directive.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Intertek Inform",
     "title": "EN 10305-1:2016, catalogue entry with scope",
     "url": "https://shop.standards.ie/en-ie/standards/en-10305-1-2016-333477_saig_cen_cen_766266",
     "checked": "2026-11-20"
    },
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-1v4",
   "text": "In practice the choice follows the function of the tube. A tube that carries pressurized fluid is ordered to Part 4. A tube that becomes a machined or formed component, such as a shaft, a sleeve or a cylinder barrel, is ordered to Part 1. Trade listings reflect this: line tube to Part 4 is offered normalized with a 3.1 certificate, Part 1 tube in several delivery conditions with a 2.2 or 3.1 document.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "s-uses",
    "p4-trade",
    "p1-trade",
    "p1-trade2"
   ]
  },
  {
   "id": "p4-trade",
   "text": "One European stockholder lists hydraulic and pneumatic line tube to Part 4 from 4 × 0.5 mm to 114.3 × 20 mm in steel grades E235 and E355 with a 3.1 inspection certificate; where the page states a delivery condition for these lines, it is +N.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-hansa",
   "text": "A German hydraulics supplier states that its EN 10305-4 tube series are delivered normalized (+N) as standard.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "HANSA-FLEX",
     "title": "Präzisionsrohr, EN 10305-4, nahtlos, Stahl E355+N, product page",
     "url": "https://shop.hansa-flex.de/de_DE/rohre/hydraulik-rohre/pr-st52-m/p/MAS_PR_ST52_%28M%29",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-first",
   "text": "The first German edition of Part 4 was DIN EN 10305-4:2003-10. DIN’s catalogue entry names no earlier German standard that it replaced.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-4:2003-10 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-4/59298420",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-2445",
   "text": "DIN 2445-2:2000-09, which covers precision steel tubes for hydraulic systems from 100 to 500 bar under dynamic loads, is a separate standard and is still listed as current.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN 2445-2:2000-09, catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2445-2/31733867",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-landefeld",
   "text": "Suppliers still pair the two: one German hydraulics supplier titles its product group ‘EN 10305-4 (DIN 2445/2)’.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Landefeld",
     "title": "Precision-hydraulic tube, seamless, EN 10305-4 (DIN 2445/2), product group",
     "url": "https://landefeld.de/gruppe/en/precision-hydraulic-tube-seamless-en-10305-4-din-24452-/HR4X1",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p4-pred",
   "text": "Part 4 has no single DIN predecessor in DIN’s catalogue. Supplier catalogues still attach older DIN numbers to it, which suggests that hydraulic line tube used to be specified through more than one German document. Treat a DIN number next to EN 10305-4 as a trade label, not as the name of a replaced standard.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p4-first",
    "p4-2445",
    "p4-landefeld"
   ]
  },
  {
   "id": "r-p4-astm",
   "text": "There is no ASTM equivalent in the strict sense. For seamless hydraulic line tubing, ASTM A822 and SAE J524 are the nearest North American counterparts to EN 10305-4. They describe the same kind of product, a seamless cold drawn tube supplied heat treated for bending and flaring, but they are separate specifications with their own grades, sizes and tests.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "p4-scope",
    "p4-astm",
    "p4-sae"
   ]
  },
  {
   "id": "p4-astm",
   "text": "ASTM A822/A822M covers seamless cold-drawn carbon steel tubing for hydraulic system service where forming calls for tight-radius bending and flaring. Typical sizes run from 1/8 to 3 1/2 in (3.2 to 88.9 mm) outside diameter, and the tubing is heat treated after the final cold-working operation.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ASTM International",
     "title": "ASTM A822/A822M-20, Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service",
     "url": "https://store.astm.org/a0822_a0822m-20.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p4-sae",
   "text": "SAE J524 covers cold drawn and annealed seamless low-carbon steel pressure tubing for hydraulic lines and other uses that need flaring and bending. SAE lists its latest issue, dated December 2025, as stabilized.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "SAE International",
     "title": "SAE J524_202512, Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring",
     "url": "https://saemobilus.sae.org/standards/j524_202512-seamless-low-carbon-steel-tubing-annealed-bending-flaring",
     "checked": "2026-11-20"
    }
   ]
  }
 ]
}