{
 "page": "https://precision.tube/en/en-10305/part-3",
 "checked": "2026-11-20",
 "statements": [
  {
   "id": "m-scope",
   "text": "EN 10305-3 sets the technical delivery conditions for welded cold sized steel tubes: circular tubes with a specified outside diameter D of up to 193.7 mm, and tubes of square and rectangular cross-section. It may also be applied to other cross-section shapes.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "UNI, Ente Italiano di Normazione",
     "title": "EN 10305-3:2023, store entry with scope",
     "url": "https://store.uni.com/en/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-lead2",
   "text": "The current edition, EN 10305-3:2023, also took over the square and rectangular tubes of the former Part 5.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-char",
   "text": "Like the rest of the series, the tubes are characterized by precisely defined dimensional tolerances and a specified maximum surface roughness.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-fields",
   "text": "The scope names the automotive, furniture and general engineering industries as typical fields of application.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-din",
   "text": "The German edition is DIN EN 10305-3:2024-02, which DIN lists as current.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-3:2024-02, standard entry",
     "url": "https://din.de/en/wdc-beuth:din21:368040564",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-3:2024-02, catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-3/368040564",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-bs",
   "text": "BSI lists BS EN 10305-3:2023, published on 31 December 2023, as current.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "BSI Knowledge",
     "title": "BS EN 10305-3:2023, catalogue entry",
     "url": "https://knowledge.bsigroup.com/products/steel-tubes-for-precision-applications-technical-delivery-conditions-welded-cold-sized-tubes-3",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-pages",
   "text": "The German edition grew from 27 pages in 2016 to 40 pages in 2024.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-3:2016-08 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-3/251709158",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-3:2024-02, catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-3/368040564",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-supersedes",
   "text": "EN 10305-3:2023 was published in December 2023 and supersedes both EN 10305-3:2016 and EN 10305-5:2016.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    },
    {
     "publisher": "ÚNMS SR, Slovak Office of Standards, Metrology and Testing",
     "title": "STN EN 10305-3 (2024), preview with the title page of EN 10305-3:2023",
     "url": "https://normy.normoff.gov.sk/norma/138662/nahlad",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-changes",
   "text": "Its foreword lists four changes: Parts 3 and 5 were merged so that one document covers welded cold sized tubes of all shapes; dimensions, thickness ranges and tolerances were aligned; steel grades were added; and the text was updated editorially.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-toc",
   "text": "The table of contents of the new edition has separate tolerance clauses for circular tubes, for square and rectangular tubes and for tubes of other shapes. It has two informative annexes: one on the options available across the EN 10305 series, and one on newer tube steels with a single-phase ferritic microstructure strengthened by nano-precipitates.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-3:2024-02 (E), table of contents",
     "url": "https://www.din.de/de/mitwirken/normenausschuesse/fes/veroeffentlichungen/wdc-beuth:din21:368040564/toc-3520972/download",
     "checked": "2026-11-20"
    },
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-evs",
   "text": "The Estonian catalogue shows the 2016 editions of Parts 3 and 5 as withdrawn from 15 December 2023.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "EVS, Estonian Centre for Standardisation and Accreditation",
     "title": "EVS-EN 10305-4:2016, catalogue entry with scope",
     "url": "https://www.evs.ee/en/evs-en-10305-4-2016",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "m-trade",
   "text": "A large European stockholder still listed square and rectangular welded precision tube under EN 10305-5 when we checked, from 10 × 10 × 1 mm to 70 × 70 × 4 mm square and from 20 × 10 × 1.5 mm to 100 × 40 × 3 mm rectangular, in +CR1 and +CR2 and in steel grades E220 and E235.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-six",
   "text": "A page, drawing or purchasing specification that describes EN 10305 as six live parts, or that cites EN 10305-5 for square and rectangular tube, shows the state before December 2023. This is still common: official overview texts and trade listings have not all caught up.",
   "kind": "reading",
   "confidence": "high",
   "rests_on": [
    "m-supersedes",
    "m-din5",
    "m-dinold",
    "m-trade"
   ]
  },
  {
   "id": "p3-make",
   "text": "A German manufacturer describes the production route as welding steel strip and then cold rolling the welded tube to size, with heat treatment afterwards where the application needs it.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and size-rolled precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-dinterm",
   "text": "DIN’s English overview calls these tubes ‘dimensionally rolled’, a literal rendering of the German maßgewalzt; the standard’s English title says ‘cold sized’.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN",
     "title": "DIN EN 10305-1:2016-08, standard entry with overview of the series",
     "url": "https://din.de/en/wdc-beuth:din21:251709111",
     "checked": "2026-11-20"
    },
    {
     "publisher": "iTeh Standards",
     "title": "EN 10305-3:2023, catalogue entry with foreword preview",
     "url": "https://standards.iteh.ai/catalog/standards/cen/a4fb1bb7-84cc-47ad-800a-1730239063ab/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-cr",
   "text": "Sized tube has delivery conditions of its own. The manufacturer describes +CR1 as welded and size-rolled tube that is normally not heat treated but can be given a final anneal, and +CR2 as tube that receives no heat treatment after welding and size-rolling. The third condition, +N, is tube normalized after the last cold forming pass.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and size-rolled precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-trade",
   "text": "One European stockholder lists Part 3 tube from 10 × 1 mm to 108 × 2 mm, round and in flat-oval, elliptical and profile shapes, in +CR1, +CR2 and +N and in steel grades E220 and E235, with a 2.2 test report.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Van Leeuwen Pipe and Tube",
     "title": "Carbon steel precision tubes and bars, product listing",
     "url": "https://www.vanleeuwen.com/products/carbon-steel-precision-tubes-and-bars",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-mpt-range",
   "text": "The manufacturer gives its own range as 25 to 114.3 mm outside diameter and 1.75 to 8.5 mm wall thickness.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "Mannesmann Precision Tubes",
     "title": "Welded and size-rolled precision steel tubes, product page",
     "url": "https://www.mannesmann.com/en/products-services/products/welded-size-rolled-precision-steel-tubes-mpt.html",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "q-2v3-short",
   "text": "Part 2 covers welded tubes that are cold drawn after welding, up to 150 mm outside diameter; Part 3 covers welded tubes that are sized by rolling.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "GlobalSpec",
     "title": "CEN, EN 10305-2, catalogue entry with scope",
     "url": "https://standards.globalspec.com/std/10004302/en-10305-2",
     "checked": "2026-11-20"
    },
    {
     "publisher": "UNI, Ente Italiano di Normazione",
     "title": "EN 10305-3:2023, store entry with scope",
     "url": "https://store.uni.com/en/en-10305-3-2023",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "p3-pred",
   "text": "The first German edition, DIN EN 10305-3:2003-02, replaced DIN 2394-1:1994-09 (dimensions) and DIN 2394-2:1994-09 (technical delivery conditions).",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "DIN Media",
     "title": "DIN EN 10305-3:2003-02 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-en-10305-3/53751278",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2394-1:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2394-1/2358639",
     "checked": "2026-11-20"
    },
    {
     "publisher": "DIN Media",
     "title": "DIN 2394-2:1994-09 (withdrawn), catalogue entry",
     "url": "https://www.dinmedia.de/en/standard/din-2394-2/2358692",
     "checked": "2026-11-20"
    }
   ]
  },
  {
   "id": "r-p3-astm",
   "text": "The nearest ASTM counterpart is ASTM A513 in its as-welded types (1a, 1b and 2): electric-resistance-welded mechanical tubing that is not drawn afterwards, available in round, square, rectangular and special shapes. This compares product forms. It does not make the requirements equivalent.",
   "kind": "reading",
   "confidence": "moderate",
   "rests_on": [
    "m-scope",
    "p2-astm"
   ]
  },
  {
   "id": "p2-astm",
   "text": "ASTM A513/A513M covers electric-resistance-welded carbon and alloy steel mechanical tubing made from hot-rolled or cold-rolled steel, in round, square, rectangular and special shapes. It defines numbered types: Types 1a, 1b and 2 are as-welded, Types 3 and 4 are sink-drawn, Type 5 is drawn over a mandrel and Type 6 has a special smooth inside diameter.",
   "kind": "sourced",
   "sources": [
    {
     "publisher": "ASTM International",
     "title": "ASTM A513/A513M-25, Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing",
     "url": "https://store.astm.org/a0513_a0513m-25.html",
     "checked": "2026-11-20"
    }
   ]
  }
 ]
}